Kickstarter Update: A Difficult but Important Decision
about 1 month ago
– Fri, Jun 26, 2026 at 09:32:59 AM
Hello everyone,
I wanted to share an update after having a lengthy meeting with our project manager regarding the current status of Wave 1 and, more importantly, why you’ve been waiting.
The good news is that both figures are complete and ready to ship. However, during final review, our project manager identified an issue with one of the parts. The challenge is that the problem has been difficult to consistently reproduce and isolate with the factory. They have already made several adjustments and improvements at no additional cost to us in an effort to resolve it, but we’ve now reached a crossroads.
At this point, we have two options.
The first is to ship the figures immediately, get Wave 1 into your hands, close the books on this chapter, and begin moving forward with the next wave. The downside is that there is still a possibility this part issue could appear on some figures. As our very first release, I don’t want anyone to receive a product that falls short of the standard we’ve been working so hard to achieve.
The second option is to invest additional money into the factory so they can continue investigating, verify the root cause, and implement a permanent fix before shipping. The tradeoff is more time. We would need to wait until the factory can confidently identify and resolve the issue before production moves forward.
This is where the rubber meets the road. It isn’t an easy decision because I know everyone has already waited far longer than any of us wanted. At the same time, I want Almighty Legends to make the right first impression. These figures represent years of work, and I would rather deliver something I’m proud to put my name on than rush them out knowing there may still be an unresolved issue.
Thank you for continuing to stand by this project. Your patience and support have meant everything, even during the most frustrating parts of this journey.
On a more exciting note, if you’re attending JoeFest this weekend, the factory has sent over the final retail packaging, and it will be on display at the Savage Crucible booth. It’s exciting to finally see that part of the project completed, and I hope those of you attending will stop by and check it out.
As always, I’ll keep everyone updated as soon as we have more information and a final decision.
Almighty Legends Production Update - 06-13-2026
about 2 months ago
– Sat, Jun 13, 2026 at 12:24:24 PM
Hello Almighty Legends Backers,
I wanted to take a moment to provide an update on where things currently stand.
At the moment, I am still waiting to receive the latest shipping update from the factory so I can provide more concrete information regarding timelines and fulfillment. I'll be honest, this has been frustrating. Like many of you, I am eager to see these figures finally make their journey into our hands.
That said, I also understand that there have been several challenges affecting our partners overseas. While these circumstances have slowed communication and progress updates, I appreciate everyone's efforts and remain committed to seeing this project through the right way.
Although the waiting has been difficult, I've tried to use this time productively. I've been working closely with Victor De Sales on model updates and refinements for the next Almighty Legends Kickstarter, building upon everything we've learned from this first campaign. The future of the line continues to take shape, and I'm excited about what's coming next.
I've also been focusing on the creative side of the Almighty Legends universe, helping establish the art direction for Issue #1 of the comic book. Bringing these characters and stories to life beyond the action figures has been an exciting process, and I look forward to sharing more as development progresses.
As soon as I receive updated information from the factory regarding shipping and fulfillment, I will share it with all of you immediately.
Thank you for your patience, understanding, and continued support. This project exists because of you, and I remain grateful for every backer who has stayed with us throughout this journey.
With gratitude,
Dacre Bush
Creator, Almighty Legends
Almighty Legends – Production Update - 041226
4 months ago
– Sun, Apr 12, 2026 at 07:20:40 AM
Hey everyone — we’ve got a big round of progress to share, and things are really moving.
✈️ Wing Test Review
We’ve completed the review of the latest wing test with the factory. The design has been fully validated, with just one minor refinement left before we lock it in for production.
📦 Packaging Update
Packaging development is officially underway, including the inner shells. The factory estimates this phase will take roughly four weeks to complete.
✅ Figures Complete
The figures themselves are done. This is a huge milestone and brings us one major step closer to fulfillment — and to finally getting these into your hands.
🛡️ Armor Packs Confirmed
Armor packs are officially a go for Kickstarter backers — and we’re expanding them. Each set will include feet plus extra pieces that weren’t in the original lineup.
🎁 Backer Bonus – Free STL
As a thank‑you for your support and patience, we’ll be including a free STL file for a front‑skirt piece designed for the Azrael/Death armor.
🚢 Shipping Timeline
The factory is currently estimating that product will be on the water by the end of May.
🔜 What’s Next
We’re already looking ahead to the next Kickstarter, which will introduce Michael and Raphael to the Almighty Legends line.
Almighty Legends Kickstarter Update - Zolocon and Year of the Horse
5 months ago
– Thu, Feb 26, 2026 at 04:14:43 PM
Hello everyone,
I want to share an important update with you. Some of it is tough news, but we are continuing to make real progress.
Packaging Update
Sample packaging was shipped last week. Due to weather delays, I will not have the samples in hand until Friday. However, I did leave one sample with Savage Crucible, and they will be showing it off at Zolocon this weekend.
Unfortunately, I will not be attending Zolocon this year, but I am grateful the packaging will still be seen and shared.
If you are attending Zolocon and visit the Savage Crucible booth, snap a picture of the new packaging and tag our Instagram @almightylegends along with #almightylegends.
We will randomly select one person to win an Almighty Legends poster and an unpainted head cast.
I would love to see the photos coming in from the show.
Factory & Production Status
I was able to speak with the factory before they went on break. Unfortunately, we did miss our original shipping window.
That said, production is currently about 84% complete. When the factory returns in March, work will ramp up quickly, and we will push toward final completion and shipment.
We are closer than we have ever been.
Special Collaboration
I am honored to share that we are now working with Stephen Ward, a master miniature painter and featured artist in ToyCollectr Magazine.
He has been taking sample prints and turning them into something truly legendary. Seeing Almighty Legends brought to life through his skill has been truly legendary
Upcoming Appearance
My next show will be The Great American Toy Show in Taunton, MA, on Saturday, March 21st. If you are in the area, I would love to see you there and share updates in person.
I know delays are frustrating. I feel that weight with you. But we are moving forward and will have these figures in hand within the next few months! The line is progressing. Almighty Legends is becoming everything we set out to build.
Thank you for your patience, your belief, and your continued support.
More updates soon.
Quick Production Update
8 months ago
– Wed, Dec 10, 2025 at 03:15:54 PM
Hey everyone! Just a small but important progress update.
• Softgoods are fully paid for and underway.
• Packaging development is in progress while the factory continues cranking out the figures.
• A new wing test arrived this week, and we are getting closer to final approval as we refine the fit and movement.
Thank you all for your patience and support. We are pushing hard to get everything just right. More updates soon. 🙏🔥
